Strontium Ferrite Pot Magnet, Diameter: 60 mm, with Hole
 
In a pot magnet, the purpose-sized steel housing is both a design challenge and an advantage. It directs flux towards the contact surface, giving a controlled magnetic attachment point in workshops and industrial environments. The strontium ferrite insert offers a durable, reliable solution. It is a good choice where stable operation, heat resistance and environmental resistance are more important than maximum strength. This version with Hole, allowing screw mounting to a holder, which is useful when a non-threaded version is required. (Quick specifications: Tmax: 200 °C)
 
The holding force in the technical table is a nominal value measured by perpendicular pull-off from thick, flat, clean steel in direct contact. Shear loads, paint, gaps and thin sheet metal can significantly reduce the actual load capacity. Typical uses include assembly aids, temporary attachments, labels and signs, simple holders and workshop positioning. The table specifies the maximum operating temperature. Ferrite inserts generally tolerate higher temperatures, but observe the specified limit.
 
Warning: keep away from children. The magnet can pinch fingers and chip or crack on impact. Store with spacers and keep away from bank cards, sensitive electronics and medical devices such as pacemakers.