Strontium Ferrite Pot Magnet, Diameter: 32 mm, Externally Threaded
 
In a pot magnet, the purpose-sized steel housing is both a design challenge and an advantage. It directs flux towards the contact surface, giving a controlled magnetic attachment point in workshops and industrial environments. The strontium ferrite insert offers a durable, reliable solution. It is a good choice where stable operation, heat resistance and environmental resistance are more important than maximum strength. The external thread can be screwed into a threaded hole or nut for quick, robust mechanical attachment. (Quick specifications: D = 32 mm; H = 7 mm; L = 23 mm; thread: M4; Tmax: 200 °C)
 
The holding force in the technical table is a nominal value measured by perpendicular pull-off from thick, flat, clean steel in direct contact. Shear loads, paint, gaps and thin sheet metal can significantly reduce the actual load capacity. Typical uses include assembly aids, temporary attachments, labels and signs, simple holders and workshop positioning. The table specifies the maximum operating temperature. Ferrite inserts generally tolerate higher temperatures, but observe the specified limit.
 
Warning: technical product. Bring magnets together and separate them carefully. Avoid impacts and keep away from electronics and medical devices.