Magnetic Drum d254 (with Permanent Magnet)
This permanent magnetic drum is designed for integration into conveyor systems and material-transfer points where dry bulk material passes over the drum surface. A multipole permanent-magnet system inside the drum attracts ferromagnetic contaminants while the non-magnetic fraction continues along its normal path.
Captured iron and steel particles are retained in the active magnetic zone and discharged separately as the drum rotates. The system can be used with powders, grain, flour, spices, plastic granules, pellets and other dry bulk materials, depending on drum size and process conditions.
Because the magnetic field is generated by permanent magnets, no electrical power is required to create the magnetic field. Drum diameter, width, shaft design, magnet material and temperature resistance can be customised for the application.
Complete our short questionnaire and we will contact you with a quotation and a technical drawing.
Magnetic Drum d254 (with Permanent Magnet)
| Product type | Permanent magnetic drum / separator for ferromagnetic contaminants |
| Nominal drum diameter | Ø254 mm |
| Magnetic configuration | Permanent magnets, multipolar system |
| Outer housing | Stainless steel |
| Integration method | Prepared for installation on a conveyor belt or at a transfer point |
| Design option | Self-rotating version available on request |
| Separation principle | Retention of ferromagnetic materials on the drum surface and separate discharge |
| Recommended material types | Recycled plastic granules, powders, grains, pellets and other free-flowing bulk materials |
| Indicative operating capacity | Medium material flows |
| Main advantage of this size | Larger active surface and stable separation in general industrial applications |
| Szerep a folyamatban | Increasing material purity and protecting downstream equipment |
| Typical applications | Abrasive milled materials, recycled plastic granules, fine powders, grains, flours, spices, pellets, mineral processing |
| Maintenance | Low; periodic inspection of the housing, bearings and drive components |
| Power supply for the magnetic section | Not required; the field is generated by permanent magnets |
){kind=link}