Rubber-Coated Neodymium Pot Magnet, Diameter: 66 mm, with Hole, Internally Threaded
 
This product is a rubber-coated neodymium pot magnet. The neodymium (NdFeB) insert is contained in a steel housing that partly closes the magnetic circuit and directs flux towards the contact surface, providing an effective attachment point in direct contact. Rubber primarily protects the surface and reduces slipping. When assessing pull-off force, remember that the coating creates a separation that may affect the maximum pull-off value. Mounting through the hole provides a quick, secure solution for a magnetic attachment point in a fixed position. The internal thread allows quick mounting and the use of accessories such as studs and eye bolts. (Quick specifications: size: 66 mm × 8,5 mm; internal thread: M6; nominal holding force: 18 kg (180 N); Tmax: 60 °C)
 
The holding force in the technical table is a nominal value measured by perpendicular pull-off from thick, flat, clean steel in direct contact. Shear loads, paint, gaps and thin sheet metal can significantly reduce the actual load capacity. Typical uses include advertising and information signs, temporary attachments on painted surfaces and mounting accessories and holders without drilling in workshops and maintenance work. In hot environments, check the Tmax value in the technical table and avoid sustained overload.
 
Warning: technical product. Bring magnets together and separate them carefully. Avoid impacts and keep away from electronics and medical devices.