Permanent Magnet Types and Their Temperature Limits


Permanent magnets retain magnetisation without a continuously applied external magnetic field. Different materials offer different combinations of strength, temperature stability and corrosion resistance. The following overview describes common types; the stated temperatures are indicative, not universal ratings for every magnet or assembly.
Neodymium magnets (NdFeB): Neodymium magnets provide high magnetic strength in a compact size. Many standard grades are rated for operating temperatures around +80°C, while suitable high-temperature grades can be used at +200°C or above under specified conditions. The safe limit depends on grade, shape, magnetic circuit and opposing fields. Always check the individual product data.
Samarium-cobalt magnets (SmCo): These rare-earth magnets combine high magnetic performance with better temperature stability than standard neodymium grades. Suitable grades are commonly used at temperatures around +250°C to +350°C. Special materials can operate at still higher temperatures, but this must be confirmed for the specific grade and assembly.
Alnico magnets: Alnico alloys contain iron, aluminium, nickel and cobalt. Their energy product is lower than that of modern rare-earth magnets, but their magnetic output is stable over a wide temperature range. Suitable grades can be used at temperatures approaching +500°C to +550°C. Their relatively low coercivity means the magnetic circuit must also be considered.
Ferrite magnets: Ferrite magnets are economical and corrosion-resistant, though less powerful for a given volume than rare-earth magnets. Suitable grades can operate at temperatures around +250°C. Low-temperature use also needs care: coercivity falls as ferrite becomes colder, so irreversible demagnetisation may occur in an unsuitable magnetic circuit.


When selecting a magnet, consider magnetic performance, operating temperature, mechanical loads and corrosion exposure together. The temperature rating of an assembled product may be lower than that of its magnetic material because of adhesives, coatings, housings or other components. Use the manufacturer's specification for the complete product.




Comments